|
|
The ModularHose.com Tablet Holder works great with the Apple iPad Pro, Apple iPad, Apple iPad Mini, Microsoft Surface including the Surface 3 Pro, Samsung Galaxy, Amazon Kindle, B&N Nook, and most tablets/e-readers from Sony, Asus, Lenovo, Google, Acer, Toshiba, Dell, and more! Designed for tablets measuring diagonally up to 14.25" (362mm) and .375" (9.5mm) deep. Order the optional Deep V-Tabs for tablets with skins/cases up to .75" deep. A great solution for holding your tablet on a desk, table, tray, wheelchair, counter, bed, and more. Depending on your application, we recommend two arm configurations to hold up a device that weighs between 1-2 lbs. Single arm designs are popular because of the minimal space it takes up but keep the arm short and vertical so that it can safely hold your device. Note for iPad 12.9 Pro users: The iPad 12.9 Pro fits in the tablet holder...YAY!... but just barely. The iPad Pro cannot have a case or skin - not enough room. And since it barely fits, you will need to loosen and remove one of the v-tabs - insert the tablet - and re-install the v-tab. It's pretty easy to install but we thought you should know. |
|
|
|
Tablet and Device Solutions |
|
|
|
|
Phone Holder w/Spring Clamp 18 inch Arm #110631 |
|
ModularHose.com Phone Holder with Spring Clamp, 18" arm Features spring clamp with adjustable phone holder that fits most phones/music players with or without a case. Designed for devices 2.25" to 4" wide. Preassembled. |
|
|
|
|
Phone Holder w/Spring Clamp 24 inch Arm #110641 |
|
ModularHose.com Phone Holder with Spring Clamp, 24" arm Features spring clamp with adjustable phone holder that fits most phones/music players with or without a case. Designed for devices 2.25" to 4" wide. Preassembled. |
|
|
|
|
Phone Holder w/Mini Clamp 8 inch Arm #110613 |
|
ModularHose.com Phone Holder with Mini Clamp, 8" arm Features Mini clamp with adjustable phone holder that fits most phones/music players with or without a case. Mini clamp is designed for round tubing up to 2 inches. Designed for devices 2.25" to 4" wide. Preassembled. |
|
|
|
|
Phone Holder w/Mini Clamp 14 inch Arm #110623 |
|
ModularHose.com Phone Holder with Mini Clamp, 14" arm Features Mini clamp with adjustable phone holder that fits most phones/music players with or without a case. Mini clamp is designed for round tubing up to 2 inches. Designed for devices 2.25" to 4" wide. Preassembled. |
|
|
|
|
Phone Holder w/Mini Clamp 18 inch Arm #110633 |
|
ModularHose.com Phone Holder with Mini Clamp, 18" arm Features Mini clamp with adjustable phone holder that fits most phones/music players with or without a case. Mini clamp is designed for round tubing up to 2 inches. Designed for devices 2.25" to 4" wide. Preassembled. |
|
|
|
|
Phone Holder w/Mini Clamp 24 inch Arm #110643 |
|
ModularHose.com Phone Holder with Mini Clamp, 24" arm Features Mini clamp with adjustable phone holder that fits most phones/music players with or without a case. Mini clamp is designed for round tubing up to 2 inches. Designed for devices 2.25" to 4" wide. Preassembled. |
|
|
|
|
Tablet Holder w/Spring Clamp 8 inch Arm #110711 |
|
ModularHose.com Tablet Holder with 8" Arm and Spring Clamp Quick and easily clamp and position a tablet where you need it. Features adjustable tablet holder for Apple iPad and other tablets measuring diagonally up to 15" (381mm) and .375" (9.5mm) thick. For thicker tablets up to .75", also order the extra deep v-tabs. Designed for tablets weighing 2 lbs or less. Comes assembled and ready to use - just insert your tablet and you are good to go. |
|
|
|
|
Tablet Holder w/Spring Clamp 8 inch Arm Deep V #110712 |
|
ModularHose.com Tablet Holder with 8" Arm and Spring Clamp Quick and easily clamp and position a tablet where you need it. Features adjustable tablet holder for Apple iPad and other tablets measuring diagonally up to 15" (381mm) and .375" (9.5mm) thick. For thicker tablets up to .75", use the included extra deep v-tabs. Designed for tablets weighing 2 lbs or less. Comes assembled and ready to use - just insert your tablet and you are good to go.
Includes a set of Deep V-Tabs! |
|
|
|
|
Tablet Holder w/Spring Clamp 14 inch Arm #110721 |
|
ModularHose.com Tablet Holder with 14" Arm and Spring Clamp Quick and easily clamp and position a tablet where you need it. Features adjustable tablet holder for Apple iPad and other tablets measuring diagonally up to 15" (381mm) and .375" (9.5mm) thick. For thicker tablets up to .75", also order the extra deep v-tabs. Designed for tablets weighing 2 lbs or less. Comes assembled and ready to use - just insert your tablet and you are good to go. |
|
|
|
|
Tablet Holder w/Spring Clamp 14 inch Arm Deep V #110722 |
|
ModularHose.com Tablet Holder with 14" Arm and Spring Clamp Quick and easily clamp and position a tablet where you need it. Features adjustable tablet holder for Apple iPad and other tablets measuring diagonally up to 15" (381mm) and .375" (9.5mm) thick. Designed for tablets weighing 2 lbs or less. Comes assembled and ready to use - just insert your tablet and you are good to go.
Includes a set of Deep V-Tabs! |
|
|
|
|
Tablet Holder w/Spring Clamp 18 inch Dual Arm #117161 |
|
ModularHose.com Two Arm Tablet Holder The two arm kit is great for wheelchairs, tables, and other locations where the tablet could be moved into multiple positions. This kit is a flexible solution for holding up a tablet where you need it. Features dual spring clamps with 2" opening and adjustable tablet holder for Apple iPad and other other tablets measuring diagonally up to 15" (381mm) and .375" (9.5mm). For thicker tablets up to .75", also order the extra deep v-tabs. Designed for tablets weighing 2 lbs or less. Comes assembled and ready to use - just insert your tablet and you are good to go. |
|
|
|
|
Tablet Holder w/Spring Clamp 18 inch Dual Arm Deep V #117162 |
|
ModularHose.com Two Arm Tablet Holder The two arm kit is great for wheelchairs, tables, and other locations where the tablet could be moved into multiple positions. This kit is a flexible solution for holding up a tablet where you need it. Features dual spring clamps with 2" opening and adjustable tablet holder for Apple iPad and other other tablets measuring diagonally up to 15" (381mm) and .375" (9.5mm). For thicker tablets up to .75", use the included deep v-tabs. Designed for tablets weighing 2 lbs or less. Comes assembled and ready to use - just insert your tablet and you are good to go.
Includes a set of Deep V-Tabs! |
|
|
|
|
Tablet Holder w/Desktop Base 8 inch Arm #190711 |
|
ModularHose.com Desktop Tablet Holder with 8" Arm A great solution for using your tablet at a desk, table, counter, on a tray - almost any flat surface will do. Features adjustable tablet holder for Apple iPad, Microsoft Surface, and other tablets measuring diagonally up to 14.25" (362mm) and .375" (9.5mm) thick. For thicker tablets up to .75", also order the extra deep v-tabs. Comes assembled and ready to use - just insert your tablet and you are good to go. |
|
|
|
|
Tablet Holder w/Desktop Base 8 inch Arm Deep V #190712 |
|
ModularHose.com Desktop Tablet Holder with 8" Arm A great solution for using your tablet at a desk, table, counter, on a tray - almost any flat surface will do. Features adjustable tablet holder for Apple iPad, Microsoft Surface, and other tablets measuring diagonally up to 14.25" (362mm) and .375" (9.5mm) thick. For thicker tablets up to .75", use the included deep v-tabs. Comes assembled and ready to use - just insert your tablet and you are good to go.
Includes a set of Deep V-Tabs! |
|
|
|
|
Tablet Holder w/Desktop Base 14 inch Arm #190721 |
|
ModularHose.com Desktop Tablet Holder with 14" Arm A great solution for using your tablet at a desk, table, counter, on a tray - almost any flat surface will do. Features adjustable tablet holder for Apple iPad, Microsoft Surface, and other tablets measuring diagonally up to 14.25" (362mm) and .375" (9.5mm) thick. For thicker tablets up to .75", also order the extra deep v-tabs. Comes assembled and ready to use - just insert your tablet and you are good to go. |
|
|
|
|
Tablet Holder w/Desktop Base 14 inch Arm Deep V #190722 |
|
ModularHose.com Desktop Tablet Holder with 14" Arm A great solution for using your tablet at a desk, table, counter, on a tray - almost any flat surface will do. Features adjustable tablet holder for Apple iPad, Microsoft Surface, and other tablets measuring diagonally up to 14.25" (362mm) and .375" (9.5mm) thick. For thicker tablets up to .75", use the included deep v-tabs. Comes assembled and ready to use - just insert your tablet and you are good to go.
Includes a set of Deep V-Tabs! |
|
|
|
|
Podium w/Spring Clamp 8 inch Arm #110411 |
|
ModularHose.com Desktop Platform/Podium with 8" Arm and Spring Clamp A podium style tray that is 8.5" x 11". Great for holding papers, lightweight devices including tablets and devices with cases, pictures, learning aids, workbooks, and much more. (model with 14" arm is pictured) |
|
|
|
|
Podium w/Spring Clamp 14 inch Arm #110421 |
|
ModularHose.com Desktop Platform/Podium with 14" Arm and Spring Clamp A podium style tray that is 8.5" x 11". Great for holding papers, lightweight devices including tablets and devices with cases, pictures, learning aids, workbooks, and much more in an upright position. |
|
|
|
|
Podium w/Spring Clamp 18 inch Dual Arm #114161 |
|
ModularHose.com Desktop Platform/Podium with dual 18" Arms and Spring Clamps A podium style tray that is 8.5" x 11". Great for holding papers, lightweight devices including tablets and devices with cases, pictures, learning aids, workbooks, and much more. |
|
|
|
|
Podium w/Desktop Base 8 inch Arm #190411 |
|
ModularHose.com Desktop Platform/Podium with 8" Arm, Large Base A podium style tray that is 8.5" x 11". Great for holding papers, lightweight devices including tablets and devices with cases, pictures, learning aids, workbooks, and much more. |
|
|
|
|
Plate w/Spring Clamp 18 inch Dual Arm #113161 |
|
ModularHose.com AT Double Arm Spring Clamp Plate Kit Commonly used for holding computer tablets under 1.5 lbs. Features a double arm with two spring clamps for holding heavier items than the single arm kit. Includes 4x6 inch plate and 1.5 feet of Loc-Line Hose on each arm. Preassembled. (90674) |
|
|
|
|
Tablet Holder Deep V-Tabs #570009 |
|
Extra deep V-tabs for 570002 tabX™ Tablet Holder. Replace original V-Tabs with these wider versions for tablets that has a case or skin, up to .75" deep. Pack of 2. |
|
|
|
|
Universal Tablet Holder #570002 |
|
ModularHose.com Tablet Holder with Mounting Bead Already have some ModularHose pieces or need to update? This updated tablet holder is available and could integrate into your current setup. Works with tablets measuring diagonally up to 15" (381mm) and .375" (9.5mm) thick. For thicker tablets up to .75", also order the extra deep v-tabs. Ideal for tablets like the Apple iPad, iPad Pro, Microsoft Surface, Samsung Galaxy, Amazon Kindle, Dell, and more. Replaces #570001 |
|
|
|
|
Tablet Holder w/Straps #130701 |
|
ModularHose.com Tablet Holder and Plate with Dual Straps This solution is great for situations when there is no surface to attach to hold up your tablet. Whether lying on the sofa or sitting in a chair/wheelchair, the adjustable straps help hold it in place for hands free operation. Attach this tablet holder to your leg or get creative by attaching to sofa/chair arms, car seats, and more. Shown with optional deep v-tabs. |
|
|
|
|
Tablet Holder w/Straps Deep V #130702 |
|
ModularHose.com Tablet Holder and Plate with Dual Straps This solution is great for situations when there is no surface to attach to hold up your tablet. Whether lying on the sofa or sitting in a chair/wheelchair, the adjustable straps help hold it in place for hands free operation. Attach this tablet holder to your leg or get creative by attaching to sofa/chair arms, car seats, and more.
Includes a set of Deep V-Tabs! |
|
|
|
|
|
|
|